Service manual

System Service Mode
SM Appendix 3-115 D127/D128
Appendix:
SP Mode
Tables
8 381 T: To tal PrtPGS CTL
These SPs count the number of pages
printed by the customer. The counter
for the application used for storing the
pages increments.
[0 to 99999999 / 0 / 1]
8 382 C:Total PrtPGS CTL
8 383 F:Total PrtPGS CTL
8 384 P:Total PrtPGS CTL
8 385 S:Total PrtPGS CTL
8 387 O:Total PrtPGS CTL
 When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
 When several documents are merged for a print job, the number of pages stored is counted
for the application that stored them.
 These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
Blank pages in a duplex printing job.
Blank pages inserted as document covers, chapter title sheets, and slip sheets.
Reports printed to confirm counts.
All reports done in the service mode (service summaries, engine maintenance reports, etc.)
Test prints for machine image adjustment.
Error notification reports.
Partially printed pages as the result of a copier jam.
8 391
LSize PrtPGS CTL [0 to 99999999 / 0 / 1]
These SPs count pages printed on paper sizes A3/DLT and larger.
 In addition to being displayed in the SMC Report, these counters
are also displayed in the User Tools display on the copy machine.