Service manual

System Service Mode
SM Appendix 3-107 D127/D128
Appendix:
SP Mode
Tables
SP8-XXX (Data Log 2)
Most of the SPs in this group are prefixed with a letter that indicates the mode of operation (the
mode of operation is referred to as an "application"). Before reading the Group 8 Service Table,
make sure that you understand what these prefixes mean.
Prefixes What it means
T: Total: (Grand Total).
Grand total of the items counted for all
applications (C, F, P, etc.)..
C: Copy application.
Totals (pages, jobs, etc.) executed for each
application when the job was not stored on the
document server.
F: Fax application.
P: Print application.
S: Scan application.
L:
Local storage
(document server)
Totals (jobs, pages, etc.) for the document server.
The L: counters work differently case by case.
Sometimes, they count jobs/pages stored on the
document server; this can be in document server
mode (from the document server window), or from
another mode, such as from a printer driver or by
pressing the Store File button in the Copy mode
window. Sometimes, they include occasions when
the user uses a file that is already on the
document server. Each counter will be discussed
case by case.
O:
Other applications
(external network
applications, for
example)
Refers to network applications such as Web
Image Monitor. Utilities developed with the SDK
(Software Development Kit) will also be counted
with this group in the future.
The Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying them on
the small LCDs of printers and faxes that also use these SPs. Read over the list of abbreviations
below and refer to it again if you see the name of an SP that you do not understand.