Service manual

System Service Mode
D127/D128 3-92 SM Appendix
001 On Board NIC
[0 to 2 / 0 / 1 /step]
0: OFF, 1: ON, 2: ON: Limited
When the "Function limitation" is set, "On board NIC" is
limited only for the @Remote or LDAP/NT authentication.
 Other network applications than @Remote or
LDAP/NT authentication are not available when
this SP is set to "2". Even if you can change the
initial settings of those network applications,
settings may not actually work.
002 On Board USB
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
5987 Mech. Counter [0: OFF / 1: ON]
001
Gives the counter list text to the SD card inserted in the service slot.
In the SD card, the folder named “SD_COUNTER” must be placed in the root
directory.
5990
SP Print Mode SMC Print
In the SP mode, press Copy Window to move to the copy screen, select the
paper size, then press Start. Select A4/LT (Sideways) or larger to ensure that
all the information prints. Press SP Window to return to the SP mode, select
the desired print, and press "EXECUTE".
001 All (Data List)
002 SP (Mode Data List)
003 User Program
004 Logging Data
005 Diagnostic Report
006 Non-Default (Prints only SPs set to values other than defaults.)