Service manual

System Service Mode
SM Appendix 3-87 D127/D128
Appendix:
SP Mode
Tables
010 Key 10
5860 SMTP/POP3/IMAP4 CTL -
020
Partial Mail Receive Timeout [1 to 168 / 72 / 1 hour/step]
Sets the amount of time to wait before saving mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail is
not received during this prescribed time.
021
MDN Response RFC2298 Compliance [0 to 1 / 1 / – ]
Determines whether RFC2298 compliance is switched on for MDN reply mail.
0: No, 1: Yes
022
SMTP Auth. From Field Replacement [0 to 1 / 0 / – ]
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
0: No. "From" item not switched. 1: Yes. "From" item switched.
025
SMTP Auth. Direct Setting [0 or 1 / 0 / – ]
Selects the authentication method for SMPT.
Bit switch:
 Bit 0: LOGIN
 Bit 1: PLAIN
 Bit 2: CRAM MD5
 Bit 3: DIGEST MD5
 Bit 4 to 7: Not used
 This SP is activated only when SMTP authorization is enabled by UP
mode.
026
S/MINE: MINE Header Setting [0 to 2 / 0 /1 /step]
Compliance setting for S/MINE output mail header.
0: Microsoft Outlook Express
1: Internet Draft
2: RFC