Service manual

System Service Mode
D127/D128 3-84 SM Appendix
5857 Save Debug Log CTL -
001
ON/OFF 0: OFF, 1: ON
Switches the debug log feature on and off. The debug log cannot be captured
until this feature is switched on.
002
Target (2: HDD 3: SD)
Selects the destination where the debugging information generated by the
event selected by SP5858 will be stored if an error is generated
[2 to 3 /1]
2: HDD
3: SD Card
005
Save to HDD
Specifies the decimal key number of the log to be written to the hard disk.
006
Save to SD Card
Specifies the debug log number for saving to an SD card.
009
Copy HDD to SD Card (Latest 4MB)
Takes the most recent 4 MB of the log written to the hard disk and copies
them to the SD Card.
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card.
010
Copy HDD to SD Card (Latest 4MB Any Key)
Takes the log of the specified key from the log on the hard disk and copies it to
the SD Card.
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card. This SP does not execute if there is no
log on the HDD with no key specified.