Service manual

System Service Mode
SM Appendix 3-83 D127/D128
Appendix:
SP Mode
Tables
5849
Installation Date CTL
Displays or prints the installation date of the machine.
001 Display
The "Counter Clear Day" has been changed to
"Installation Date" or "Inst. Date".
002 Switch to Print
Determines whether the installation date is printed on the
printout for the total counter.
[0 or 1/ 1 / 1/step]
0: Off (No Print), 1: On (Print)
003 Total Counter
Displays the total counter when the installation date is
registered to the machine.
5853
Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM
onto the hard
disk. Then these stamps can be used by the system. If this is not done, the
user will not
have access to the fixed stamps ("Confidential", "Secret", etc.).
You must always execute this SP after replacing the HDD or after formatting
the HDD.
Always switch the machine off and on after executing this SP.
5856
Remote ROM Update
Allows the technician to upgrade the firmware using a parallel cable when
updating the remote ROM.
002 Local Port CTL
[0 or 1 / 0 / 1/step]
0: Disallow
1: Allow