Service manual

Card Save Function
D127/D128 6-46 SM
1. Use the numeric key "4" to turn bit 4 ON and be sure to press "#" button to confirm. The result
should look like: 00010000 as shown above. By doing this Card Save option will appear in
"List/Test Print".
2. Exit SP Mode.
3. Press the "
" button.
4. Select "Printer Features".
5. Select "List/Test Print".
1. Select "Card Save (ADD) or Card Save (New)".
2. Select OK to the message "Switching to Card Save mode.". Then exit the "List/Test Print"
menu.
3. Send a job to the printer.
4. As soon as the printer receives the data, it will be stored on the SD card automatically with no
print output. Nothing is displayed on the screen indicating that a Card Save operation was
successful.
5. To exit Card Save mode, Change the Bit Switch Settings back to the default 00000000.
6. After main power switch is turned off, remove the SD card.