Service manual

SC Tables
D127/D128 6-22 SM
No.
Definition
Symptom Possible Cause/Countermeasure
B
[0612]: Detailed error code
Cut-in in ASIC occurs.
 Defective ASIC
 Defective devices in which ASIC
detects cut-in.
1. Replace the controller board.
B
[06FF]: Detailed error code
The pipeline clock frequency
rate is different from the
prescribed value.
 Defective CPU devices
 Mode bit data error, which is used
for initializing CPU.
1. Replace the controller board.
B
[0702]: Detailed error code
The result when the program is
executed in the command cache
is different from desirable value.
 Insufficient CPU cache
 Insufficient memory process
speed
1. Replace the controller board.
2. Replace the RAM DIMM.
B
[0709, 070A]: Detailed error code
Even you write the data in the
only cache of memory, the data
is actually written in another
area (not cache) of memory.
 Defective CPU devices
 Incorrect SPD
 Boot mode setting error
1. Replace the controller board.
2. Replace the RAM DIMM.
B
[0801, 0804, 0807, 0808, 0809, 80A]: Detailed error code
An error occurs when checking
the TLB.
 Defective CPU devices
1. Replace the controller board.