Service manual

ENGINE SERVICE MODE
SM 5-13 G130/G131
Service Tables
[Fusing Temp.] Fusing Temperature
1105
(Heating or Pressure roller: Paper Type, [Color], Simplex/Duplex, Process Speed)
Paper Type -> N: Normal, OHP. TH: Thick, MT: Middle Thick, SP: Special
Some settings of fusing temperature depend on the destination (US or
Europe/Asia).
US: Setting for US, EU: Setting for Europe/Asia
1105 026 H: TH *BCU
[0 to 190 / 155
/ 5°C/step]
1105 028 P: TH *BCU
[0 to 190 / 135
/ 5°C/step]
1105 029 H: Envelop *BCU
[0 to 190 / 155
/ 5°C/step]
1105 030 P: Envelop *BCU
[0 to 190 / 135
/ 5°C/step]
H: Offset Temp *BCU
[1 to 20 / 5
/ 1°C/step]
1105 031
Sets the heating roller temperature for the printing start condition when changing the
process speed.
Fusing temperature must be decreased when the machine changes to a process
speed that is slower than the current process speed (for example, when the speed
changes from 162 mm/s to 81 mm/s). The machine idles while reducing the fusing
temperature. When the fusing temperature becomes lower than the ready
temperature, the machine starts printing.
Ready Temperature = Target temperature + Temperature specified in this SP mode.
P: Offset Temp *BCU
[1 to 20 / 10
/ 1°C/step]
1105 032
Sets the pressure roller temperature for the printing start condition when changing
the process speed.
1105 033 H: SP: L *BCU
1105 034 H: SP: M *BCU
[-20 to 30 / –5
/ 1°C/step]
1105 035 H: SP: H *BCU
[-20 to 30 / –5
/ 1°C/step] Only for G130
1105 036 P: SP: L *BCU
[-20 to 30 / –5
/ 1°C/step]
1105 037 P: SP: M *BCU
[-20 to 30 / –5
/ 1°C/step]
1105 038 P: SP: H *BCU
[-20 to 30 / –5
/ 1°C/step] Only for G130
1105 051 H: N [K] S: L *BCU
1105 052 H: N [K] D: L *BCU
[100 to 190 / 135
/ 5°C/step]
1105 053 P: N [K] S: L *BCU
1105 054 P: N [K] D: L *BCU
[100 to 190 / 130
/ 5°C/step]
1105 055 H: MT [K] S M *BCU
[ 100 to 190 / 175
/ 5°C/step] Only for G131
1105 056 H: MT [K] S H *BCU
[ 100 to 190 / 175
/ 5°C/step] Only for G130
1105 057 H: MT [K] D M *BCU
[ 100 to 190 / 175
/ 5°C/step] Only for G131
1105 058 H: MT [K] D H *BCU
[ 100 to 190 / 175
/ 5°C/step] Only for G130
1105 059 H: MT [FC] S L *BCU
[ 100 to 190 / 140
/ 5°C/step]
1105 060 H: MT [FC] S M *BCU
[ 100 to 190 / G130: 155
, G131: 175 / 5°C/step]
1105 061 H: MT [FC] D L *BCU
[ 100 to 190 / 140
/ 5°C/step]
1105 062 H: MT [FC] D M *BCU
[ 100 to 190 / G130: 155
, G131: 175 / 5°C/step]
1105 063 P: MT [K] S M *BCU
[ 100 to 190 / 150
/ 5°C/step] Only for G131
1105 064 P: MT [K] S H *BCU
[ 100 to 190 / 150
/ 5°C/step] Only for G130
1105 065 P: MT [K] D M *BCU
[ 100 to 190 / 150
/ 5°C/step] Only for G131
1105 066 P: MT [K] D H *BCU
[ 100 to 190 / 150
/ 5°C/step] Only for G130
1105 067 P: MT [FC] S L *BCU
[ 100 to 190 / 135
/ 5°C/step]
1105 068 P: MT [FC] S M *BCU
[ 100 to 190 / G130: 140
, G131: 150 / 5°C/step]
1105 069 P: MT [FC] D L *BCU
[ 100 to 190 / 135
/ 5°C/step]
1105 070 P: MT [FC] D M *BCU
[ 100 to 190 / G130: 140
, G131: 150 / 5°C/step]
1105 071 H: MT [K] S L *BCU
1105 072 H: MT [K] D L *BCU
[ 100 to 190 / 140
/ 5°C/step]
1105 073 P: MT [K] S L *BCU
1105 074 P: MT [K] D L *BCU
[ 100 to 190 / 135
/ 5°C/step]
1105 081 H: SP2 [K] S L *BCU
1105 082 H: SP2 [K] D L *BCU
1105 083 H: SP2 [FC] S L *BCU
[ 100 to 190 / 155
/ 5°C/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA