Service manual

TRANSFER AND PAPER TRANSPORT UNIT

SM 3-31 G130/G312

Replacement

and

Adjustment

3.9.2 TRANSFER BELT CLEANING UNIT

NOTE: Reset the maintenance counter, (SP7-804-18) after you replace the

transfer belt-cleaning unit.

Pull out the transfer belt-cleaning unit [A] ( x 1) at the same time you push the

lever.

NOTE:

1) The blade [B] can damage the belt if you do not continue to push the

lever.

2) Make sure that the transfer unit release lever is put back to the original

position ( 3.7) when you reassemble.

Do a forced line position adjustment (SP5-993-002 or Menu > Maintenance > Color

Regist. > Auto Adjust) after you replace the transfer belt-cleaning unit.

G130R586.WMFF

[A]

[B]