Service manual

SERVICE MAINTENANCE
SM 2-3 G103/G131
Preventive
Maintenance
2.2 SERVICE MAINTENANCE
PM Counter Reset
Reset the related PM Counter after you replace a unit or component that is not a
part of a maintenance kit ( 2.1). To do this, use PM Counter Reset (SP7-804).
The table shows the service programs that you must use.
SP7-804-011 By-pass Tray Feed Roller SP7-804-015 Paper Feed Tray 4 Feed Roller
SP7-804-012 Paper Feed Tray 1 Feed Roller SP7-804-017 Transfer Unit
SP7-804-013 Paper Feed Tray 2 Feed Roller SP7-804-018 Transfer Cleaning Unit
SP7-804-014 Paper Feed Tray 3 Feed Roller
PM Table
Symbol key: C: Clean, R: Replace, L: Lubricate, I: Inspect
Main unit
Item 100K 150K 250K 1,000K 3,000K EM Remarks
Transfer Unit R
Transfer Cleaning Unit R
By-pass Feed Roller R
By-pass Pick-up Roller R
By-pass Separation Roller R
Two-tray Finisher
Items 100K 150K 250K 1,000K 3,000K EM Remarks
Rollers C Damp cloth
Discharge Brush C Dry cloth
Sensors C Blower brush
Jogger Fences I Replace if required.