Service manual

OPTIONAL TRAY UNIT
G130/G131 1-26 SM
11. Install the cable to the connectors as follows:
• J1003 (punch unit) [A] to CN12 (booklet finisher unit) [D]
• J1004 (punch unit) [B] to CN14 (booklet finisher unit) [C]
12. Fasten the cable with the clamps.
13. Reassemble the booklet finisher unit.
NOTE: Check that the side guide and the front cover correctly join with each
other [E].
14. Attach the decal [F].
15. Turn on the main switch and check the punch operation.
G130I550.WMF
G130I551.WMF
G130I552.WMF
[A]
[B]
[D]
[C]
[E]
[F]