Service manual

OPTIONAL TRAY UNIT
SM 1-13 G130/G131
Installation
7. Adjust the position of the connection
bracket [A] as necessary ( x 2):
• Upper position for the printer with the
two-tray paper feed unit or LCT
• Lower position for the printer with the
one-tray paper feed unit
8. Connect the finisher [B] with
the printer (Long screw x 1).
9. Connect the finisher cable to
the connector of the printer.
10. Install the two trays [C] (Short screw x 1
for each).
11. Extend the external tray of the printer
(see step 2).
12. Turn the main switch on and check the
operation.
B599I908.WMF
B599I911.WMF
B599I910.WMF
[A]
[B]
[C]