Service manual

PRINTER FUNCTIONS
SM 6-83 G130/G131
Detailed
Descriptions
6.11.4 CONTROLLER FUNCTIONS
Sample Print
This feature was formerly known as “Proof Print.” This function gives users a
chance to check the print results before starting a multiple-set print run. Only the
first page is printed.
Hold Print
This feature has the same function as "Sample Print". The difference from "Sample
Print" is that a print job can be checked and printed with Web Image Monitor and
no page is printed to check the print result. The print job data is deleted after
printing.
Locked Print
Using this feature, the print job is stored in the machine but will not be printed until
the user inputs an ID at the machine’s operation panel. This ID must match the ID
that has been input with the printer driver.
Stored Print
This feature has the same function as "Locked Print". The difference from "Locked
Print" is that a print job can be checked and printed with Web Image Monitor. The
print job data is stored after printing.
• The size of the hard disk partition for these features is 20 GB.
• The partition can hold up to 100 files, including files stored using these
features.
• The partition can hold a log containing up to 30 errors, including these
features.
• The maximum number of pages is 9,000 (1,000/file), including jobs using
these features.
• Stored data is automatically deleted after it is printed (except stored print).
• Stored data can be manually deleted at the operation panel or WIM.