Service manual

PRINTER
G130/G131 1-10 SM
8. Turn the release lever [A]
counterclockwise to its lowermost
position. (The lever does not stay in
this position if you do not hold it.)
Keep the lever in this position with
tape.
NOTE: The release lever lifts the
transfer belt up and presses
it against the black PCU.
The surfaces of the belt and
PCU can get damaged by
the friction between them if
you transport the machine
with the two units in this
position.
9. Attach shipping tape to the covers and doors. Then shrink-wrap the machine
tightly.
G130I508.WMF
[A]