Service manual

DUPLEX UNIT
G130/G131 6-76 SM
6.10.6 FEED TO TWO-TRAY FINISHER AND BOOKLET FINISHER
With Optional One-Tray Paper Feed Unit
The paper is fed out to the finisher from the upper exit [A].
The junction gate [B] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [C] is activated, the machine waits
until the trailing edge has passed junction mylar 1 [D]. Then the paper is switched
back and junction mylar 1 directs the paper out to the finisher.
With Optional LCT or Two-Tray Paper Feed Unit
n
The paper is fed out to the finisher from the lower exit [A].
The junction gate [B] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [C] is activated, the machine waits
until the trailing edge has passed junction mylar 2 [D], but before it passes junction
mylar 3 [E]. Then the paper is switched back and junction mylar 2 directs the paper
out to the finisher.
G130D569.WMF
G130D570.WMF
G130D571.WMF
G130D572.WMF
[A]
[C]
[D]
[E]
[A]
[C]
[D]
[D]
[B]
[D]
[B]