Service manual

DUPLEX UNIT
SM 6-75 G130/G131
Detailed
Descriptions
6.10.5 FEED TO DUPLEX FEED UNIT
This shows how the machine feeds paper back into the machine after side 1 is
printed.
The junction gate [A] diverts the paper from the fusing unit to the lower part of the
inverter unit. After the duplex inverter sensor [B] is activated, the machine waits
until the trailing edge has passed junction mylar 3 [C]. Then the paper is switched
back and junction mylar 3 directs the paper back into the machine for the second
side.
The next page shows how the paper is fed out to the finisher after both sides are
printed.
G130D567.WMF
G130D568.WMF
[A]
[C]
[B]