Service manual

DUPLEX UNIT
G130/G131 6-74 SM
6.10.4 FEED TO EXTERNAL EXIT TRAY (NON-DUPLEX MODE)
This shows how the machine feeds paper through the duplex unit to the external
tray [A], when duplex mode is not selected.
NOTE: The paper cannot be fed out to the external tray if duplex printing is
selected.
The junction gate [B] directs the paper from the fusing unit out to the external tray
at one of the following times:
• If thick paper or OHP mode is selected
• If the external tray is selected as the output tray with the operation panel or the
printer driver
G130D566.WMF
[A]
[B]