Service manual

PRINTER
G130/G131 1-8 SM
1.3.5 TRANSPORTING THE MACHINE
Read this section when you use transportation equipment to move the machine.
When you manually move the machine to a different floor in the same building, see
section 1.3.4.
Necessary Adjustment after Transportation
After you install the machine at a new location, do the Line Adjustment (SP5-993-
002) or the Auto Adjustment (Menu > Maintenance > Color Regist. > Auto Adjust).
When you do one of these programs, make sure that the tray fences are set
correctly. If not set correctly, tray fences can make color images shift.