Service manual

OPTIONAL UNIT COMBINATIONS
SM 1-3 G130/G131
Installation
1.1.4 POWER REQUIREMENTS
CAUTION
1. Insert the plug firmly in the outlet.
2. Do not use an outlet extension plug or cord.
3. Ground the machine.
1. Input voltage level:
NA: 120 V, 60 Hz: More than 12 A (G131)/ 11 A (G130)
EU/ASIA: 220 V ~ 240 V, 50 Hz/60 Hz: More than 7 A (G131)/ 6 A (G130)
2. Permissible voltage fluctuation: ±10%
3. Do not put or place anything on the power cord.
1.2 OPTIONAL UNIT COMBINATIONS
No. Options Remarks
1 One-tray paper feed unit
2 Two-tray paper feed unit
3 Large capacity tray
You can only install one of these three
4 Two-tray finisher One from No. 4 and No. 6; No. 8 necessary
5 Punch kit (3 types) No. 4 necessary; One of the three types
6 Booklet Finisher One from No. 4 and No. 6; No. 8 necessary
7 Punch unit (4 types) No. 6 necessary; One of the four types
8 Duplex unit Standard for G131
9 64 MB memory
10 128 MB memory
11 256 MB memory
You can only install one of these three
12 40 GB HDD unit Standard for G131
13 IEEE 1284
14 IEEE 1394
15 IEEE 802.11b
16 Bluetooth
17 Gigabit Ethernet
18 USB Host I/F
You can only install one of these six
19 PictBridge No.18 necessary
20 NVRAM memory