Service manual

SD CARD APPLI MOVE
SM 5-103 G130/G131
Service Tables
5.5 SD CARD APPLI MOVE
5.5.1 OVERVIEW
The service program “SD Card Appli Move” (SP5-873) enables you to copy
application programs from an SD card to another SD card.
There are three SD card slots. This machine uses slot 1 to store the firmware of
this machine and application programs. Slot 2 is for storing application programs.
Slot 3 is for maintenance work only. Because of this, if the application programs
are stored in three SD cards or more,  choose one SD card or two from these SD
cards and  store all the application programs on these one or two cards.
Use extreme caution when using SD Card Appli Move:
1. The authentication data is transferred with the application program from an SD
card to the other SD card. Authentication fails if you try to use the SD card after
you copy the application program from this card to another SD card.
2. Do not use an SD card if it has been used for some other work, for example, on
a computer. Normal operation is not guaranteed when such SD card is used.
3. Keep the SD card in a safe place after you copy the application program from
the card to another card. This is because:  The SD card can be the only proof
that the user is licensed to use the application program.  You may need to
check the SD card and its data to solve a problem in the future.
4. You cannot copy PostScript data to another SD card. You can copy an
application program to the SD card that stores PostScript data.