Service manual

ENGINE SERVICE MODE
SM 5-95 G130/G131
Service Tables
5.3.5 TEST PATTERN (SP5-997)
Test Pattern Printting
Selects the tray in which
desired paper size is
loaded.
SP5-997-001
Selects a pattern.SP5-997-002
Selects the Single Color
or Full Color mode.
Selects a color if printing
the test pattern in the
Single Color mode.
SP5-997-003
SP5-997-004
SP5-997-005 Selects the resolution.
Prints the test pattern.
Tray or by-pass
Selects the desired
paper size.
SP5-997-007
SP5-997-006
Tray
By-pass
G130S502.WMF
Test Pattern Selection (SP5-997-002)
0: None
1: 1-dot sub-scan
2: 2-dot sub-scan
3: 1-dot main-scan
4: 2-dot main-scan
5: 1-dot grid (F)
7: 1-dot grid (R)
9: 1-dot slant
11: 1-dot pattern
12: 2-dot pattern
13: 4-dot pattern
15: trimming
16: Cross Stitch S
17: Cross Stitch M
18: Belt Horizontal
19: Belt Vertical
20: Checkereflag
21: Grey scale Ver
22: Grey scale Hor
23: Solid