Service manual

ENGINE SERVICE MODE
SM 5-87 G130/G131
Service Tables
Reading SP5-803
-XXX
Bit Description
0 1
Paper Exit
0 Fusing Exit Sensor Paper not detected Paper detected
1 Paper Exit Sensor Paper not detected Paper detected
2 Duplex Exit Sensor 1 Paper not detected Paper detected
3 Duplex Exit Sensor 2 Paper not detected Paper detected
4 Duplex Exit Sensor 3 Paper not detected Paper detected
6
5 Exit Upper Limit Sensor Not full Full
Fusing Unit
0 Fusing Unit (Set) Not set Set
1 Fusing Unit (New) 0 to 1 : New unit installed
2 Oil Supply Unit (Set) Set Not set
3 Oil Supply Unit (New) 1 to 0 : New unit installed
4 European Version US Europe
5 Waste Oil Bottle Set Sensor Not Set Set
7
6 Waste Oil Sensor Not full Full
Motor Lock
0 Development Drive Motor - CMY Not locked Locked
1 Development Drive Motor - K Not locked Locked
2 Fusing Fan Motor Not locked Locked
3 Air Pump Motor - MY Not locked Locked
8
4 Air Pump Motor - CK Not locked Locked
Dev. Unit/ PCU
0 Development Unit - K Not set Set
1 Development Unit - C Not set Set
2 Development Unit - M Not set Set
3 Development Unit - Y Not set Set
4 PCU - K Not set Set
5 PCU - C Not set Set
6 PCU - M Not set Set
9
7 PCU - Y Not set Set
Toner End Sens
0 Black Toner Not end End
1 Cyan Toner Not end End
2 Magenta Toner Not end End
10
3 Yellow Toner Not end End
Others
0 LD H.P. Sensor Not H.P. H.P.
1 Transfer Belt Sensor Not contact Contact
2 - - -
3 Used Toner Sensor Not full Full
4 Used Toner Bottle Set Sensor Not set Set
5 Drum Gear Position Sensor - K
Deactivated
Activated
(Actuator inside
sensor)
13
6 Drum Gear Position Sensor - CMY
Deactivated
Activated
(Actuator inside
sensor)