Service manual

ENGINE SERVICE MODE
G130/G131 5-82 SM
8521
T: PrtPGS/FIN *CTL The number of pages processed by the finisher
[0~9999999/ 0 / 1]
8524
P: PrtPGS/FIN *CTL [0~9999999/ 0 / 1]
001 Sort 005 Z-Fold
002 Stack 006 Punch
003 Staple 007 Other
004 Booklet
• Even if the pages are too many for the finisher to staple, all pages are counted
(including unstapled pages).
• The counter of stapling (003) increases by +1 when the paper is transported from
the printer to the tray of the finisher. Even if a paper jam occurs on this path, the
counter (003) increases. If the same job is retried, the counter (003) increases
once again.
8531
Staples *CTL The number of staples
[0~9999999/ 0 / 1]
8581
T: Counter *CTL The number of outputs in a specific color mode
[0~9999999/ 0 / 1]
001 Total 010 Total: Color
002 Total: Full Color 011 Total: B/W
003 B&W/Single Color 012 Full Color: A3
004 Development: CMY 013 Full Color: ~B4
005 Development: K 014 Full Color Print
008 Print: Color 015 Mono Color Print
009 Print: B/W
8584
P: Counter *CTL The number of outputs in a specific color mode
[0~9999999/ 0 / 1]
001 B/W 003 Full Color
002 Single Color
8591
O: Counter *CTL The number of A3/DLT, duplex printing, or staples
[0~9999999/ 0 / 1]
001 A3/DLT 003 Staple
002 Duplex
• Note that these counters are not for the printer application program.
8771
Dev Counter *CTL The number of rotations of the development rollers
[0~9999999/ 0 / 1]
001 Total 004 M
002 K 005 C
003 Y