Service manual

ENGINE SERVICE MODE
SM 5-67 G130/G131
Service Tables
SP6-XXX (Peripherals)
[Punch] 6110
Adjusts the punching position.
Punch 1 US: 2 punch holes
Europe: 2 punch holes
North Europe: 4 punch holes
Punch 2 US: 3 punch holes
Europe: 4 punch holes
Increment: Holes move toward the paper center.
Decrement: Holes move toward the paper edge.
6110 001 MF Fin 1 *BCU
6110 002 MF Fin 2 *BCU
[-7.5 to 7.5 / 0
/ 0.5 mm/step]
6110 003 Booklet Fin [-2.5 to 7.5 / 0 / 0.5 mm/step]
[Staple] Staple Position
6111
Adjusts the stapling position.
Increment: Staple position moves toward the edge of paper.
Decrement: Staple position moves toward the center of paper.
NOTE: Although the adjustable range is ±3.5 mm, the stapling position can be
changed only by 1.0 mm when stapling one position at the front or rear side even
when the input value is more than 1.0.
6111 001 MF Fin *BCU [-3.5 to 3.5 / 0 / 0.5 mm/step]
6111 002 A3 *BCU
6111 003 B4 *BCU
6111 004 A4 *BCU
6111 005 DLT *BCU
6111 006 LG *BCU
6111 007 LT *BCU
[-3.75 to 3.75 / 0
/ 0.25 mm/step]
6112
[Fold] Fold Position *BCU [-3.75 to 3.75 / 0.
/ 0.25 mm/step]
6111 001 A3
6111 002 B4
6112 003 A4
6112 004 DLT
6112 005 LG
6112 006 LT
Adjusts the folding positions of the optional
booklet finisher.