Service manual

ENGINE SERVICE MODE
G130/G131 5-66 SM
5997 [Test Pattern]
5997 002 Pattern Selects a test pattern.
[0 to 23 / 0 / 1/step]
0: None
1: 1-dot sub-scan
2: 2-dot sub-scan
3: 1-dot main-scan
4: 2-dot main-scan
5: 1-dot grid (F)
7: 1-dot grid (R)
9: 1-dot slant
11: 1-dot pattern
12: 2-dot pattern
13: 4-dot pattern
15: trimming
16: Cross Stitch S
17: Cross Stitch M
18: Belt Horizontal
19: Belt Vertical
20: Checkereflag
21: Grey scale Ver
22: Grey scale Hor
23: Solid
5997 003 Color Selects the color for making a test pattern.
[0 to 6 / 6 / 1/step] Alphanumeric
0: Red 1: Green
2: Blue 3: Yellow
4: Magenta 5: Cyan
6: Black
5997 004 Mode Selects the color mode for making a test print.
[0 or 1 / 0 / 1/step] Alphanumeric
0: Full Color 1: Single Color
5997 005 Resolution Selects the resolution for making a test print.
[0 to 2 / 1
/ 1/step] Alphanumeric
0: 600x600 1: 1200x600
2: 1200x1200
5997 006 MLT Paper Size Selects the paper size for making a test pattern
from the by-pass table.
[0 to 3 / 0
/ 1/step] Alphanumeric
0: A4 LEF 1: LT LEF
2: A3 3: DLT
5997 007 Print Exe Prints the test pattern with the settings specified
with SP5-997-001 to 006.
NOTE: When exiting the SP mode, the test print
mode is automatically canceled.
5998
[Memory Clear] ( 5.3.2)
5998 001 ENG Setting Clears the engine settings except for counters.
5998 002 ENG Counter Clears all counters.