Service manual

ENGINE SERVICE MODE
G130/G131 5-56 SM
5857 [Save Debug Log]
Erase HDD Log *CTL 5857 011
Deletes the debug log from the hard disk.
Erase SD Log *CTL 5857 012
Deletes the debug log from the SD card.
Free Space on SD *CTL 5857 013
Shows the free space on the SD card.
SD to SD (4MB) *CTL 5857 014
Copies the most recent 4 MB of the debug log from an SD card to a different SD
card.
SD to SD (Any) *CTL 5857 015
Sets the key number of the debug log copied from an SD card to a different SD
card.
5857 016 Make HDD Log File *CTL
5857 017 Make SD Log File *CTL
Makes a log file on the HDD to save debug logs.
To save debug logs, the controller makes a log file
first, then writes data in the file. This procedure
can use much time. The user can switch off the
main power switch before the log is written in the
file. To prevent this possible problem, you can
prepare a log file in advance. If you do this, the
controller uses less time to save logs because the
log file is prepared.
5858 [Debug Save When]
Engine SC Error *CTL [0 to 1 / 0 / 1/step] Alphanumeric
0: OFF, 1: ON
5858 001
Collects debug logs when an engine-related SC code occurs.
System SC Error *CTL [0 to 1 / 0 / 1/step] Alphanumeric
0: OFF, 1: ON
5858 002
Collects debug logs when a controller-related SC code occurs.
Any SC Error *CTL [00000 to 65535 / 0 / 1/step] 5858 003
Sets the SC code whose logs are collected.
Jam *CTL [0 to 1 / 0 / 1/step] Alphanumeric
0: OFF, 1: ON
5858 004
Collects debug logs when a paper jam occurs.
5859 [Log Save Key No.]
*CTL [0000000 to 9999999 / 0
/ 1/step]
5859 001 Key 1
5859 002 Key 2
5859 003 Key 3
5859 004 Key 4
5859 005 Key 5
5859 006 Key 6
5859 007 Key 7
5859 008 Key 8
5859 009 Key 9
5859 010 Key 10
Sets the key number of a specific event ( NOTE)
whose logs are saved in the specified storage (
NOTE). When multiple key numbers are assigned, the
logs are collected in this order: Key 1, Key 2, ..., Key 9,
Key 10.
NOTE: The event is set with SP5-858. The storage is set
with SP5-857-2.
5860 [SMTP/POP3/IMAP]
SMTP Srv Port No. *CTL [1 to 65535 / 25 / 1/step] 5860 002
Specifies the number of the SMTP server ports.