Service manual

ENGINE SERVICE MODE
SM 5-55 G130/G131
Service Tables
5848 [Web Service]
5848 004 ac: ud (Access control:
User directory)
*CTL
5848 009 ac: jc (Access control:
Job control)
*CTL
5848 011 ac: dm (Access control:
Device management)
*CTL
Switches access control on and off.
0000: No access control 0001: Denies access to
DeskTop Binder.
5848 201 Regular Trans
Not used
5848 210 LogType: Job 1
Not used
5848 211 LogType: Job 2
Not used
5848 212 LogType: Access
Not used
5848 213 Primary Srv
Not used
5848 214 Secondary Srv
Not used
5848 215 Start Time
Not used
Interval Time [0 to 1000 / 1 / 1 hour/step] 5848 216
Adjusts the transmission interval time for Web Service.
This SP is enabled only when SP5848-217 is set to "2".
Timing [0 to 2 / 0 / 1 /step]
0: Transmission off
1: One by one transmission
2: Interval transmission
5848 217
Sets the transmission timing for Web Service.
5851 [Bluetooth]
Mode *CTL [0 to 1 / 0 / 1/step] Alphanumeric
0: Public, 1: Private
5851 001
Selects the Bluetooth mode.
5856
[Remote Update] Remote ROM Update
Local Port *CTL [0 to 1 / 0 / 1/step]
0: Disable, 1: Enable
5856 002
Allows the technician to upgrade the firmware using a parallel cable when updating
the remote ROM.
5857 [Save Debug Log]
On/Off *CTL [0 to 1 / 0 / 1/step]
0: OFF, 1: ON
5857 001
Enables or disables the debug log saving function.
Target *CTL [2 to 3 / 2 / 1/step]
2: HDD, 3: SD
5857 002
Sets the storage location for the debug log.
Save to HDD *CTL 5857 005
Sets the key number of the debug log.
Save to SD *CTL 5857 006
Sets the key number of the debug log.
HDD to SD (4MB) *CTL 5857 009
Copies the most recent 4 MB of the debug log from the hard disk to the SD card.
HDD to SD (Any) *CTL 5857 010
Sets the key number of the debug log copied from the hard disk to the SD card.