Service manual

ENGINE SERVICE MODE
G130/G131 5-54 SM
5840 [IEEE 802.11b]
WEP key number *CTL [00~11 / 00 / 1 binary]
00: Key #1
01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
5840 011
Selects the WEP key.
5842
[NFA analysis] Net File Analysis Mode Setting DFU
5842 1 NFA analysis *CTL Default: 00000000 – do not change
Netfiles: Jobs to be printed from the document
server using a PC and the DeskTopBinder
software
5844 [USB]
5844 001 Transfer Rate *CTL Adjusts the USB transfer rate.
[0 to 1 / 0 / 1/step] Alphanumeric
0: Auto Change, 1: Full speed
5844 002 Vendor ID *CTL Displays the vendor ID. DFU
5844 003 Product ID *CTL Displays the product ID. DFU
5844 004 Dev Release Num *CTL Displays the development release version
number. DFU
5845
[Delivery Srv] Delivery Server
Retry Interval *CTL [60 to 900 / 300 / 1 second/step] 5845 003
Specifies the retry interval.
No. of Retries *CTL [0 to 99 / 3 / 1/step] 5845 004
Specifies the maximum number of retries.
5846 [UCS Setting]
Maximum Entries *CTL 5846 003
Displays the number of maximum entries.
Initialize All Dir *CTL
#
5846 050
Initializes all address book data in the UCS except administrator account data.
Search option [0 to 255 / 15 / Bit switches]
Bit 0: No distinction between cap and small letter
Bit 1 and 3: Japan use only
5846 060
Sets the condition of the search option that searches an address in the UCS.
Complexity opt 1
Not used
5846 062
Complexity opt 2
Not used
5846 063
Complexity opt 3
Not used
5846 064
Complexity opt 4
Not used
5846 065