Service manual

ENGINE SERVICE MODE
SM 5-53 G130/G131
Service Tables
5839 [IEEE1394]
*C T L
5839 007 Cycle Master Turns the cycle master function on/off.
[0 or 1 / 1
/ 1 /step]
0: OFF
1: ON
5839 008 BCR mode Selects either ‘Standard’, 'IRM Color Copy', or 'Always
Effective'.
5839 009 IRM 1394a Check Turns the IRM 1394a check on/off.
[0 or 1 / 0
/ - ]
0: OFF
1: ON
If the IRM is not defined as 1394a standard, its node is
used as IRM.
5839 010 Unique ID Turns on/off the function of the unique ID enumeration.
[0 or 1 / 1 / - ]
0: OFF
1: ON
5839 011 Logout Prevents initiators from logging on or makes initiators
log off.
[0 or 1 / 1
/ - ]
0: OFF
(Prevents the initiators, having already logged on, to
log on if they try to log on.)
1: ON
(Makes initiators, having already logged on, to log off if
they try to log on.)
5839 012 Login Allows/disallows an initiator to exclusively log on.
[0 or 1 / 0
/ - ]
0: OFF (Disallows)
1: ON (Allows)
5839 013 Login MAX Specifies the maximum initiators able to log on.
[0 to 63 / 8
/ 1 /step]
5840 [IEEE 802.11b]
Channel Max *CTL [1 to 11 or 14 / 1 / 1 /step]
Europe/Asia: 1 to 13
USA: 1 to 11
Note: Do not change the setting
5840 006
Sets the maximum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location. The
default settings are set for the maximum end of the range for each area. Adjust the
upper 4 bits to set the maximum number of channels. DFU
Channel Min *CTL [1 to 11 or 14 / 1 / 1 /step]
Europe/Asia: 1 to 13
USA: 1 to 11
Note: Do not change the setting
5840 007
Sets the minimum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location. The
default settings are set for the minimum end of the range for each area. Adjust the
lower 4 bits to set the minimum number of channels. DFU