Service manual

ENGINE SERVICE MODE
G130/G131 5-38 SM
3107
[Vsg Display] Vsg Display (Front or Rear)
Vsg F *BCU [0.00 to 5.00 / - / 0.01V/step] 3107 001
Displays the Vsg value of the front ID sensor.
Vsg is normally 4.0 ± 0.5 V.
If Vsg is out of the adjustment range and this is detected 3 times consecutively, it
leads to SC385.
LED Current F *BCU [0 to 1023 / - / 1] 3107 002
Displays the ID sensor LED current adjusted during Vsg adjustment.
Vsg C *BCU [0.00 to 5.00 / - / 0.01V/step] 3107 003
Displays the Vsg value of the center ID sensor.
Vsg is normally 4.0 ± 0.5 V.
If Vsg is out of the adjustment range and this is detected 3 times consecutively, it
leads to SC385.
LED Current C *BCU [0 to 1025 / - / 1] 3107 004
Displays the ID sensor LED current adjusted during Vsg adjustment.
Vsg R *BCU [0.00 to 5.00 / - / 0.01V/step] 3107 005
Displays the Vsg value of the rear ID sensor.
Vsg is normally 4.0 ± 0.5 V.
If Vsg is out of the adjustment range and this is detected 3 times consecutively, it
leads to SC385.
LED Current R *BCU [0 to 1025 / - / 1] 3107 006
Displays the ID sensor LED current adjusted during Vsg adjustment.
Vsg avg bk *BCU [0.00 to 5.00 / - / 0.01V/step] 3107 007
Displays the average black Vsg value of the center ID sensor.
[Dev. g Target] Development Gamma Target ([Color])
3120
Adjusts the development gamma by changing the Vref value used for toner density
control. Vref is automatically corrected so that the gamma measured during the
process control self-check becomes “the value set with this SP mode ± 0.15”
3120 001 Set [K] *BCU
3120 002 Set [Y] *BCU
3120 003 Set [M] *BCU
3120 004 Set [C] *BCU
[0.5 to 1.00 / 0.7
/ 0.01 mg/cm
2
/KV / step] DFU
3120 005 Display [K] *BCU
3120 006 Display [Y] *BCU
3120 007 Display [M] *BCU
3120 008 Display [C] *BCU
Displays the current development gamma value.
3120 009 Mode Select *BCU Sets the condition for the development gamma
correction.
[ 0 to 3 / 1
/ 1 /step] Alphanumeric
0: Non
1: Humidity
2: Dev. Rotation
3: All
3121
[Dev. g Display] Development Gamma Display ([Color])
Displays the development gamma measured during the process control self-check.
3121 001 [K] *BCU
3121 002 [Y] *BCU
3121 003 [M] *BCU
3121 004 [C] *BCU
[0 to 10.00 / - / 1 mg/cm2/KV /step]
Normal Range: 1.00 to 2.00