Service manual

ENGINE SERVICE MODE
SM 5-37 G130/G131
Service Tables
SP3-XXX (Process)
3005
[TD Initial] TD Sensor Initialization ([Color])
3005 001 [K]
3005 002 [Y]
3005 003 [M]
3005 004 [C]
3005 005 [All Color]
Initializes the developer. DFU
Press the Enter key to execute the initialization
after the machine asks “Execute?”
Result *BCU [1 to 9 / - / -]
1: Success, 2 to 9: Failure
3005 006
Displays the developer initialization result.
All colors are displayed. Values show in the order K Y C M.
e.g., 1 1 2 1: Initialization of Cyan failed but the others succeeded
See the troubleshooting section for details.
3006
[Vcnt Initial] Vcnt Initial Setting Display ([Color])
3006 001 [K] *BCU
3006 002 [Y] *BCU
3006 003 [M] *BCU
3006 004 [C] *BCU
Displays the initial Vcnt value.
[0 to 24.0 / – / 0.1 V/step]
3006 005 [Bk] *BCU
3006 006 [Y] *BCU
3006 007 [M] *BCU
3006 008 [C] *BCU
Adjusts the target Vref value for the initial setting.
[0 to 24.0 / 3.0
/ 0.1 V/step]
[TD Vcnt] TD sensor Current Vcnt Value ([Color])
3007
Displays the current Vcnt value.
3007 001 Vcnt Current: K *BCU
3007 002 Vcnt Current: Y *BCU
3007 003 Vcnt Current: M *BCU
3007 004 Vcnt Current: C *BCU
[ 0 to 24.0 / - / 0.1 V/step ]
Vcnt Mode Select *BCU [ 0 or 1 / 1 / - ]
0: Disable, 1: Enable
3007 005
Enables or disables the Vcnt correction.
Vcnt Max *BCU [ 0 to 4 / 1.7 / 0.1 V/step] 3007 006
Adjusts the maximum Vcnt at developer initialization
Vcnt Min *BCU [ 0 to 4 / 2.7 / 0.1 V/step] 3007 007
Adjusts the minimum Vcnt at developer initialization
3007 008 Vcnt SelfChk Max *BCU [ 0 to 5.4 / 1.7 / 0.1 V/step]
Adjusts the maximum Vcnt at process control self check
3007 009 Vcnt SelfChk Min *BCU [ 0 to 5.4 / 2.7 / 0.1 V/step]
Adjusts the minimum Vcnt at process control self check
3008
[Temp Humi] Temperature/ Humidity Display
Humidity *BCU [ 0 to 100 / - / 1%/step ] 3008 001
Displays the humidity measured by the humidity/temperature sensor.
Temp 1 *BCU [ 0 to 100 / - / 1%/step ] 3008 002
Shows the temperature measured by thermistor 2 on the laser optics unit.
Temp 2 *BCU [ 0 to 100 / - / 1%/step ] 3008 003
Shows the temperature measured by thermistor 1 on the laser optics unit