Service manual

ENGINE SERVICE MODE
G130/G131 5-12 SM
1104
[Fusing Cont.] Fusing Control
Temp Control *BCU [ 0 to 2 / 2 / 1 /step] Alphanumeric
0: off
1: out of FD/FU Single on
2: on
The meanings of displayed "FD" and "FU"
FD: When a single printed paper is fed to the
standard tray
FU: When a printed paper is fed to the external
tray.
1104 031
Selects the temperature control condition.
[Fusing Temp.] Fusing Temperature
1105
(Heating or Pressure roller: Paper Type, [Color], Simplex/Duplex, Process Speed)
Paper Type -> N: Normal, OHP. TH: Thick, MT: Middle Thick, SP: Special
Some settings of fusing temperature depend on the destination (US or
Europe/Asia).
US: Setting for US, EU: Setting for Europe/Asia
H: Ready *BCU [10 to 100 / 10 / 1
o
C/step] 1105 001
Sets the heating roller temperature for the printing ready condition.
After the main switch has been turned on, the machine enters the print ready
condition when the heating roller temperature reaches the temperature specified in
this SP mode.
When the machine is in the recovery mode from the energy saver or auto off mode,
the machine becomes ready when both heating and pressure roller temperatures
reach the specified temperature.
Ready temperature = (Target temperature specified in SP1-104-25 or 105-4 to 129)
– Temperature specified in this SP mode.
P: Ready *BCU [10 to 100 / 30 / 1
o
C/step] 1105 002
Sets the pressure roller temperature for the printing ready condition.
Ready temperature = (Target temperature specified in SP1-104-25 or 105-4 to 129)
– Temperature specified in this SP mode
The following SPs set the target temperatures of the heating and pressure rollers. (NA: North
America, EU: Europe and Asia, L: Low speed [81 mm/s], M: Middle speed [125 mm/s (G130)/162
mm/s (G131)], H: High speed [162 mm/s (only for G130)]
1105 004 H: N [K] S M *BCU
[100 to 190 / 160
/ 5°C/step] Only for G131
1105 005 H: N [K] S H *BCU
[100 to 190 / 160
/ 5°C/step] Only for G130
1105 006 H: N [K] D M *BCU
[100 to 190 / 160
/ 5°C/step] Only for G131
1105 007 H: N [K] D H *BCU
[100 to 190 / 160
/ 5°C/step] Only for G130
1105 008 H: N [FC] S L *BCU
[100 to 190 / 135
/ 5°C/step]
1105 009 H: N [FC] S M *BCU
[100 to 190 / G130: 140
, G131: 160 / 5°C/step]
1105 010 H: N [FC] D L *BCU
[100 to 190 / 135
/ 5°C/step]
1105 011 H: N [FC] D M *BCU
[100 to 190 / G130: 140
, G131: 160 / 5°C/step]
1105 013 H: OHP *BCU
[100 to 190 / 145
/ 5°C/step]
1105 015 P: N [K] S M *BCU
[0 to 190 / 145
/ 5°C/step] Only for G131
1105 016 P: N [K] S H *BCU
[0 to 190 / 145
/ 5°C/step] Only for G130
1105 017 P: N [K] D M *BCU
[0 to 190 / 145
/ 5°C/step] Only for G131
1105 018 P: N [K] D H *BCU
[0 to 190 / 145
/ 5°C/step] Only for G130
1105 019 P: N [FC] S L *BCU
[0 to 190 / 130
/ 5°C/step]
1105 020 P: N [FC] S M *BCU
[0 to 190 / G130: 130
, G131: 145 / 5°C/step]
1105 021 P: N [FC] D L *BCU
[0 to 190 / 130
/ 5°C/step]
1105 022 P: N [FC] D M *BCU
[0 to 190 / G130: 130
, G131: 145 / 5°C/step]
1105 024 P: OHP *BCU
[0 to 190 / 130
/ 5°C/step]