Service manual

ENGINE SERVICE MODE
G130/G131 5-10 SM
1005
[Dev. Mt Speed2] Development Drive Motor Speed 2
([Color], Process Speed, Paper Type), Paper Type -> TH: Thick
Color: L: [K] *BCU [-0.40 to 0.40 / 0 / 0.05 %/step] 1005 004
Adjusts the color development drive motor speed for the B&W 81mm/s process
speed. The value stored in this SP mode is different from SP1-004-004 (see the
note for SP 1-004).
YMC development motor speed for B/W at 81 mm/s = YMC development motor
speed for color mode at 81 mm/s (1-004-004) + 1-005-004.
At the 81 mm/s process speed, the transfer unit position for B&W is different than for
color mode. The transfer unit position affects the paper transport speed slightly. This
SP mode can adjust the motor speed for B&W mode.
[Dev. Mt Speed3] Development Drive Motor Speed 3
([Color], Process Speed, Paper Type), Paper Type -> SP: Special
1006
Adjusts the development motor speed for special paper.
1006 001 [K] L SP *BCU
1006 002 [K] M SP *BCU
[-4.0 to 4.0 / 0
/ 0.1 %/step]
1006 003 [YMC] L SP *BCU
1006 004 [YMC] M SP *BCU
[-0.4 to 0.4 / -0.1
/ 0.05 %/step]
1006 005 [K] L SP2 *BCU [-0.4 to 0.4 / 0.0 / 0.05 %/step]
1006 006 [YMC] L SP2 *BCU [-0.4 to 0.4 / -0.1 / 0.05 %/step]
1006 007 [K] L SP3, 4 *BCU
1006 008 [K] M SP3, 4 *BCU
[-0.4 to 0.4 / 0.0
/ 0.05 %/step]
1006 009 [K] H SP3, 4 *BCU [-0.4 to 0.4 / 0.0 / 0.05 %/step]
This SP is only for G130.
1006 010 [YMC] L SP3, 4 *BCU
1006 011 [YMC] M SP3, 4 *BCU
1006 012 [YMC] H SP3, 4 *BCU
[-0.4 to 0.4 / -0.1
/ 0.05 %/step]
1007
[Dev. Mt Speed4] Development Drive Motor Speed 4
[CL] Mail TH *BCU [-1.00 to 0.00 / -0.40 / 0.05%/step] 1007 001
Adjusts the development motor speed for postcards.
[YMC] L [K] TH *BCU [-0.40 to 0.40 / 0.00 / 0.05/step] 1007 002
Adjusts the registration line speed for the B&W mode for thick paper. The line speed
is calculated as follows:
Line speed = SP1-004-004 + SP1-005-003 + SP1-007-002
[K] L TH2, 3, 4 *BCU [-0.40 to 0.40 / 0.00 / 0.05/step] 1007 003
Adjusts the fusing line speed for the color mode for thick paper 2, 3, 4. The line
speed is calculated as follows:
Line speed = SP1-004-001 + SP1-007-003
[YMC] L [CL] TH2, 3, 4 *BCU [-0.40 to 0.40 / -0.1 / 0.05/step] 1007 004
Adjusts the registration line speed for the color mode for thick paper. The line speed
is calculated as follows:
Line speed = SP1-004-004 + SP1-007-004
[YMC] L [Bk] TH2, 3, 4 *BCU [-0.40 to 0.40 / -0.1 / 0.05/step] 1007 005
Adjusts the registration line speed for the B&W mode for thick paper. The line speed
is calculated as follows:
Line speed = SP1-004-004+ SP1-007-005