Service manual

ENGINE SERVICE MODE
G130/G131 5-8 SM
5.3 ENGINE SERVICE MODE
5.3.1 SERVICE MODE TABLE
SP1-XXX (Feed)
1001
[Lead Edge Reg.] Leading Edge Registration
(Paper Type, [Color], Process Speed), Paper Type -> N: Normal, OHP, TH: Thick
1001 001 N [K] L *BCU
1001 002 N [K] M *BCU
1001 003 N [K] H *BCU
1001 004 N [FC] L *BCU
1001 005 N [FC] M *BCU
1001 006 TH [K] *BCU
1001 007 TH [FC] *BCU
1001 008 OHP [K] *BCU
1001 009 OHP [FC] *BCU
Adjusts the leading edge registration. This SP
changes the registration clutch operation timing.
[-10.0 to 10.0 / 0.0
/ 0.1 mm/step] FA
1002
[S-to-S Reg.] Side-to-Side Registration
1002 001 By-pass Table *BCU
1002 002 Paper Tray 1 *BCU
1002 003 Paper Tray 2 *BCU
1002 004 Paper Tray 3 *BCU
1002 005 Paper Tray 4 *BCU
1002 006 Duplex *BCU
Adjusts the side-to-side registration. This SP
changes the laser main scan start position.
[-10.0 to 10.0 / 0.0
/ 0.1 mm/step] FA
1003
[Paper Buckle] Paper Buckle
(Paper Tray or By-pass, Paper Type, Process Speed), Paper Type: N: Normal, TH:
Thick
1003 001 P L *BCU
1003 002 P M *BCU
1003 003 P H *BCU
1003 004 B N L *BCU
1003 005 B N M *BCU
1003 006 B N H *BCU
1003 007 B TH *BCU
1003 008 B OHP *BCU
Adjusts the amount of paper buckle at the
registration roller. This SP changes the paper feed
timing.
[-10 to 10 / 0
/ 1 mm/step]