Service manual

CONTROLLER SERVICE MODE
SM 5-5 G130/G131
Service Tables
5.2 CONTROLLER SERVICE MODE
5.2.1 SERVICE MODE TABLE
1001 [Bit Switch]
1001 001 Bit Switch 1 *CTL
1001 002 Bit Switch 2 *CTL
1001 003 Bit Switch 3 *CTL
1001 004 Bit Switch 4 *CTL
1001 005 Bit Switch 5 *CTL
1001 006 Bit Switch 6 *CTL
1001 007 Bit Switch 7 *CTL
1001 008 Bit Switch 8 *CTL
Adjusts bit switch settings. DFU
1003 [Clear Setting]
1003 001 Init. System Initializes settings in the System menu of the user
mode.
1003 003 Delete Program
DFU
[Print Summary] 1004
Prints the service summary sheet (a summary of all the controller settings).
1005 [Disp. Version]
Displays the version of the controller firmware.
1101 [ToneCtlSet]
1101 001 Tone (Factory) *CTL
1101 002 Tone (Prev.) *CTL
1101 003 Tone (Current) *CTL
Recalls a set of gamma settings. This can be
either a) the factory setting, b) the previous
setting, or c) the current setting.
[ToneCtlSet]
*CTL
1102
Sets the printing mode (resolution) for the printer gamma adjustment. The asterisk
(*) shows which mode is set.
• *1200x1200Photo • 600x600Text • 1200x600Text
• 1200x1200Text • 600x600Photo • 1200x600Photo
1103 [PrnColorSheet]
1103 001 ToneCtlSheet
1103 002 ColorChart
Prints the test page to check the color balance
before and after the gamma adjustment.
[ToneCtlValue] 1104
Adjusts the printer gamma for the mode selected in the Mode Selection menu.
1104 001 Set Black 1 *CTL
1104 021 Set Cyan 1 *CTL
1104 041 Set Magenta 1 *CTL
1104 061 Set Yellow 1 *CTL
[0 to 255 / 16
/ 1/step]
1104 002 Set Black 2 *CTL
1104 022 Set Cyan 2 *CTL
1104 042 Set Magenta 2 *CTL
[0 to 255 / 32
/ 1/step]