Service manual

SC TABLE
G130/G131 4-40 SM
SC No. Item Definition Possible Cause
Related
SCs
Troubleshooting Procedure Type
SC 867 SD card error The SD card is ejected from
the slot.
• The SD card is ejected
from the slot.
1. Install the SD card.
2. Turn the main switch off and on.
CTL
SC 868 SD card access
error
243-252: File
system error
253: Device
error
An error report is sent from the
SD card reader.
• An error is detected in
the SD card.
1. For a file system error, format the SD
card on your PC.
2. For a device error, turn the mains
switch off and on.
3. Replace the SD card.
4. Replace the controller.
CTL
SC 870 Address book
error
An error is detected in the data
copied to the address book
over a network.
• Defective software
program
• Defective HDD
• Incorrect path to the
server
1. Turn the main switch off and on.
2. Initialize the address book data
(SP5-846-050).
3. Replace the HDD.
CTL
SC 872 HDD mail data
error
An error is detected in the HDD
at machine initialization.
• Defective HDD
• Power failure during an
access to the HDD
1. Turn the main switch off and on.
2. Replace the HDD.
CTL
SC 873 HDD mail
transfer error
An error is detected in the HDD
at machine initialization.
• Defective HDD
• Power failure during an
access to the HDD
1. Turn the main switch off and on.
2. Replace the HDD.
CTL
SC 874 Delete All error
1: HDD
An error of the deleting all data
for the HDD/NVRAM is
detected after the data
overwriting function has been
executed.
• Defective HDD
• No SD card
1. Turn the main switch off/on and try
the operation again.
2. Replace the HDD.
CTL
SC 875 Delete All error
2: Data area
An error occurs while the
machine deletes data from the
HDD.
• Deleting data failure
1. Turn the main switch off/on and try
the operation again.
CTL
SC 876 Log Data Error The log data error is detected
when obtaining or referring the
log data while the machine is
activated, turning on the main
power or logging data.
• Log data corrupt
• Defective or Not
installed SD card
• Defective software
• Incorrect HDD or
NVRAM
1. Turn the main switch off/on and try
the operation again.
2. Initialize the HDD.
3. Replace the HDD.
4. Replace the NVRAM.
5. Replace the SD card.
CTL