Service manual
DRIVE UNIT
G130/G131 3-62 SM
5. 4 drum gears [A] ( x 2 for each)
NOTE:
1) Do not move the drum-gear shafts after you remove the drum gears.
2) The print quality can be affected if the teeth on the drum gears are
damaged. Check to make sure that they are not damaged.
6. Timing belt gear [B] (Timing belt x 1, Bushing x 1)
7. Idle gear [C]
8. 4 gear drive holders [D]∼[G] ( x 1 for each)
9. Development clutch securing plate [H] ( x 8, x 4)
NOTE: Two of the six connectors are on the rear side.
G130R631.WMFF
G130R632.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
[H]