Service manual

DRIVE UNIT
SM 3-61 G130/G312
Replacement
and
Adjustment
3.13.3 DEVELOPMENT MOTOR - CMY
1. Rear cover ( 3.5.1)
2. Swing out the controller box ( 3.12.1).
3. Drum gear cover [A] ( x 4,  x 5)
4. Turn the drum gears [B] counterclockwise. Make sure the shoulder screws
[C][D] are in the three, seven, or eleven o'clock positions.
NOTE: You can align the three corners of each drum-gear shaft to the three
openings on the development-clutch securing plate [E].
G130R629.WMFF
G130R630.WMFF
[A]
[B]
[C]
[D]
[E]