Service manual

FUSING
G130/G131 3-44 SM
3.11.7 HOT ROLLER AND HEATING ROLLER
1. Upper cover ( 3.11.2)
2. Heating roller lamp ( 3.11.5)
3. Fusing belt unit ( 3.11.6)
4. Hot roller gear [A] ( x 1)
5. Hot roller [B]
6. Heating roller [C]
Reassembling
Do the following procedures when you reassemble this unit:
• Apply grease to the roller shaft bearing of the pressure roller frame.
• Make sure that the edges of the bushings are positioned inside the shaft
bearings.
G130R605.WMFF
[A]
[B]
[C]