Service manual

FUSING
SM 3-39 G130/G312
Replacement
and
Adjustment
3.11.2 UPPER COVER
1. Detach the finisher from the printer if it is installed.
2. Open the duplex inverter unit if it is installed.
3. Fusing unit ( 3.11.1)
4. Knob [A] ( x 1)
5. Upper cover [B] ( x 4)
NOTE: One of the screws [C] is longer than the other screws. Make sure that
the screw [C] is positioned as shown above when you reassemble this
unit.
G130R598.WMFF
[B]
[A]
[C]