Setup guide

Monitoring and Configuring the Printer

❖ DNS server address selection

msh> dhcp dnsaddr {dhcp | static}

• Specify whether to obtain the DNS server address from the DHCP server

or use the address set by a user.

• To obtain the DNS server address from the DHCP server, specify “dhcp”.

To use the address set by a user, specify “static”.

❖ Domain name selection

msh> dhcp domainname {dhcp | static}

• Specify whether to obtain the domain name from the DNS server or use the

domain name set by a user.

• To obtain the domain name from the DHCP server, specify “dhcp”. To use

the domain name set by a user, specify “static”.

Reference

p.114 “Using DHCP”

p.63 “dns”

p.64 “domainname”

diprint

The direct printing port enables direct printing from a network-connected com-

puter.

Use the “diprint” command to change direct printing port settings.

❖ View settings

The following command displays the current direct printing port settings:

msh> diprint

Example output:

port 9100

timeout=300(sec)

bidirect on

con multi

apl async

• The “port” specifies the port number of the direct printing port.

• The “bidirect” setting indicates whether the direct printing port is bidirec-

tional or not.

❖ Setting timeout

msh> diprint timeout [30~65535]

• You can specify the timeout interval to use when the printer is expecting

data from the network.

• The default is 300 seconds.