Setup guide

Monitoring and Configuring the Printer
42
2
C In the list, select a machine whose configuration you want to change.
D On the [Tools] menu, point to [Device Settings], and then click [Select Paper
Type].
A Web browser opens and the window for entering the login user name and
password for the Web Image Monitor administrator appears.
E Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
The [Paper] page appears.
F Select a paper type in the [Paper Type] list for each tray. Enter required set-
ting items.
G Click [Apply].
H Quit Web Image Monitor.
I Quit SmartDeviceMonitor for Admin.
Note
❒ For details about setting items, see Help in the [General Settings] on [Config-
uration] page.
Managing User Information
Follow the procedure below to manage the user's information using SmartDe-
viceMonitor for Admin.
Prints jobs can be managed and functions restricted by user codes.
Starting User Management Tool
Follow the procedure below to start User Management Tool.
A Start SmartDeviceMonitor for Admin.
B On the [Group:] menu, point to [Search Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using TCP/IP SNMP v3, enter the user authentication.
C In the list, select a machine you want to manage.
D On the [Tools] menu, click [User Management Tool].
The dialog box for entering the login user name and password appears.