Setup guide

Using SmartDeviceMonitor for Admin

Locking the Menus on the Machine's Control Panel

Follow the procedure below to lock the menus on the machine's control panel.

A Start SmartDeviceMonitor for Admin.

B On the [Group:] menu, point to [Search Device], and then click [TCP/IP],

[IPX/SPX] or [TCP/IP SNMPv3].

A list of machines using the selected protocol appears.

Select the protocol of the machine whose configuration you want to change.

If you are using TCP/IP SNMP v3, enter the user authentication.

C Select a machine.

D On the [Tools] menu, point to [Device Settings], and then click [Lock Operation

Panel Menu].

A Web browser opens and the window for entering the login user name and

password for the Web Image Monitor administrator appears.

E Enter the login user name and password, and then click [Login].

For details about the user name and password, consult your network admin-

istrator.

The [System] page of Web Image Monitor appears. Enter required setting

items.

F Select [Level 1] or [Level 2] in the [Protect Printer Operation Panel] list.

G Click [Apply].

H Quit Web Image Monitor.

I Quit SmartDeviceMonitor for Admin.

Note

❒ For details about setting items, see Help in the [General Settings] on [Config-

uration] page.