Setup guide

Using a Printer Server
26
1
Setting up using NIB Setup Tool
A Log on to the file server as an administrator or administrator equivalent.
B Start NIB Setup Tool from the [Start] menu.
C Click [Property Sheet], and then click [OK].
D Select the printer you want to configure, and then click [Finish].
A dialog box prompting you to perform the remaining configuration tasks in
the Web browser appears. Click [OK], and then wait until Web Image Monitor
starts automatically.
E A dialog box for entering the [User Name] and [Password] appears.
Enter the user name and password, and then click [OK].
For details about the login name and password, consult your network admin-
istrator.
F Click [Configuration] in the left area, click [Network], and then click [NetWare].
G Confirm the settings, and then click [Apply].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
H Click [Logout].
Reference
For details , see p.22 “Setting Up as a Print Server (NetWare 3.x)”
Setting Up as a Remote Printer (NetWare 3.x)
Follow the procedure below to use the machine as a remote printer under Net-
Ware 3.x.
Setting up using PCONSOLE
A Enter “PCONSOLE” from the command prompt.
F:> PCONSOLE
B Create a print queue.
When using the existing print queue, go to the procedure for creating a printer.
C From the [Available Options] menu, select [Print Queue Information], and then
press the {Enter} key.
D Press {Insert} key, and then enter a print queue name.
E Press {Esc} key to return to the [Available Options] menu.