Operating instructions

System Settings

❖ WINS Configuration

Specify the WINS server settings.

If [On] is selected, specify the [WINS Server] IPv4 address as “xxx.xxx.xxx.xxx”

(“xxx” indicates a number).

If DHCP is in use, specify the [Scope ID].

Enter [Scope ID] using up to 31 characters.

•On

• Primary WINS Server:000.000.000.000

• Secondary WINS Server:000.000.000.000

•Scope ID

• Off

❖ IPv4 over 1394

When you use the IPv4 over 1394 function of the IEEE 1394 interface to con-

nect the machine to the network, or you print from computer with the IPv4

over 1394 driver, you must specify [Active] for [IPv4 over 1394].

• Active

•Inactive

Printing with IPv4 over 1394 is possible under Windows Me/XP and Win-

dows Server 2003.

❖ SCSI print (SBP-2)

When you print using the SCSI print client function supported by Windows

2000/XP, or Windows Server 2003, you must set [SCSI print (SBP-2)].

• Active

•Inactive

❖ Bidirectional SCSI print

Specifies the printer's response mode etc. for status requests when using the

IEEE 1394 interface.

• On

•Off

If this is set to [Off] bidirectional communication will not work.