Operating instructions

System Settings

Parallel Interface

This section describes the user tools in the Parallel Interface menu under Inter-

face Settings.

[Parallel Interface] is displayed when this machine is installed with the IEEE 1284

interface board.

❖ Parallel Timing

Sets the timing for the control signal of the parallel interface.

• ACK outside

•ACK inside

•STB down

❖ Parallel Communication Speed

Sets the communication speed for the parallel interface.

• High Speed

•Standard

❖ Selection Signal Status

Sets the level for the select signal of the parallel interface.

• HIGH

•LOW

❖ Input Prime

Sets whether to validate or invalidate the input prime signal upon reception.

•Active

• Inactive

❖ Bidirectional Communication

Sets the printer's response mode to a status acquisition request when using a

parallel interface.

• On

•Off

When set to [Off], bidirectional communication function will be disabled, and

the printer driver will not be installed under Windows Auto Detect function.

❖ Signal Control

Specify how error during printing or sending facsimile from the computer is

to be dealt with.

• Job Acceptance Priority

•Printer Priority