Operating instructions

Interface Settings
59
2
❖ IPv6 Stateless Address Autoconfiguration
Specify IPv6 Stateless Address Autoconfiguration.
• Active
•Inactive
❖ DNS Configuration
Make settings for the DNS server.
When you select [Specify], enter the [DNS Server] IPv4 address as
“xxx.xxx.xxx.xxx”(“x” indicates a number).
• Auto-Obtain (DHCP)
•Specify
• DNS Server 1: 000.000.000.000
• DNS Server 2: 000.000.000.000
• DNS Server 3: 000.000.000.000
❖ DDNS Configuration
Specify the DDNS settings.
• Active
•Inactive
❖ Domain Name
Specify the domain name.
• Auto-Obtain (DHCP)
•Specify
❖ WINS Configuration
Specify the WINS server settings.
If [ On] is selected, enter the [ WINS Server] IPv4 address as
“xxx.xxx.xxx.xxx”(“x” indicates a number).
If DHCP is in use, specify the [Scope ID].
Enter a [Scope ID] using up to 31 characters.
•On
• Primary WINS Server:000.000.000.000
• Secondary WINS Server:000.000.000.000
•Scope ID
• Off
❖ Effective Protocol
Select the protocol to use in the network.
•IPv4: Active / Inactive
• IPv6: Active / Inactive
•NetWare: Active / Inactive
• SMB: Active / Inactive
• AppleTalk: Active / Inactive