Operating instructions

Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
Menu User Tool Setting Requirements
Interface Settings/Network Machine IPv4 Address Neccessary
Interface Settings/Network IPv4 Gateway Address Neccessary
Interface Settings/Network DNS Configuration As required
Interface Settings/Network DDNS Configuration As required
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Neccessary
Interface Settings/Network LAN Type Neccessary
Interface Settings/Network Permit SNMPv3 Communication As required
Interface Settings/Network Permit SSL/TLS Communication As required
Interface Settings/Network Host Name As required
Interface Settings/IEEE 802.11b Communication Mode Neccessary
Interface Settings/IEEE 802.11b SSID Setting As required
Interface Settings/IEEE 802.11b Channel As required
Interface Settings/IEEE 802.11b Security Method As required
Interface Settings/IEEE 802.11b Transmission Speed As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required