Operating instructions

Network Settings
25
1
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending file with IEEE 1394 interface
cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
Menu User Tool Setting Requirements
Interface Settings/IEEE 1394 IPv4 Address Neccessary
Interface Settings/IEEE 1394 DDNS Configuration As required
Interface Settings/IEEE 1394 Host Name As required
Interface Settings/IEEE 1394 Domain Name As required
Interface Settings/IEEE 1394 WINS Configuration As required
Interface Settings/IEEE 1394 IPv4 over 1394 Neccessary
Interface Settings/Network IPv4 Gateway Address Neccessary
Interface Settings/Network DNS Configuration As required
Interface Settings/Network Effective Protocol Neccessary
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required